GSmart t600/MW998 DVB-H support, problems, discussion

[dattad]

Here's the Cyberlink MDTV app with support of English and Chinese languages. Use it, if you want to watch DVB-H TV.
There're two files in the archive: Cyberlink MDTV Player and Siano DVB-H driver, you should install both of them.

DVB-H_(Cyberlink_MDTV).rar

Cyberlink MDTV Player and DVB-H driver

(994.83 KiB) Downloaded 838 times

[BokkieAndijk]

Hey Dattad.
First of all, sorry that I forgot to thank you for your quick answer an most of all for the software. The twenty-six of January my new phone contract started. Finally, I could check if the software works. I putted both of the files in the memory of the phone and installed them from there. Then I rebooted the device and should be able to receive 11 channels. I went to Amsterdam where the reception must be perfect and waited for the device to receive the needed information from my provider. Did not work. I think you know the DVB-T system only needs a strong signal and a XML file with the frequentions to work properly and the DVB-H needs a sort of permission from the provider to work properly. When I start the application, it says: The driver is not installed well ore there is another problem. Could you tell me where you exactly installed the files and if I fore sure am not missing a file or something?

Greetz, Bokkie.

[dattad]

Do you use GSmart t600? Do you get "The driver is not installed.." mesage with Cyberlink player? Funny that you haven't tested the app before going to Amsterdam.

[BokkieAndijk]

Hey Dattad,
No I do not use a GSmart T600. I use a Glofiish V900. This device has exactly the same tv chipset as the GSmart T600 (siano 1010) and also runs under Windows Mobile.I did chek it out here as well but the reception here is not good so I when to Amsterdam where the reception is perfect for sure. My work is in Amsterdam so I had to go there anyway. The error I get is this:Please make sure the receiver driver is well installed, the receiver is plugged in and please restart APP and try again. If the problem still exists, reboot your device and try again.
Greetz, Bokkie.

[dattad]

I also have these files on my device in Windows folder:
libmad.dll
SmsCtrlLibCE.dll
SmsDataLibCE.dll
SmsGenDrv.dll
SmsSdio.dll
siano_disable.exe
siano_enable.exe
siano_uhf.exe
siano_vhf.exe
T-DMB_SDIO_V3_08_15.inp
DVB-H_SDIO_V3_08_15.inp
DVB-T_SDIO_V3_08_15.inp

Do you have any of them? The files may be hidden.

[clivelaw]

Hi Datad
is it possible you can extract the DVB-T_SDIO_V3_08_15.inp part is it a cab file would you be able to let me have it please thank's clivelaw

[dattad]

Here's a cab file with the following files:
1. installed to "Windows" folder
SmsCtrlLibCE.dll
SmsGenDrv.dl
SmsDataLibCE.dll
SmsSdio.dll
SmsNdis.dll
2. installed to "Program Files\SianoSmsUtils"
SmsMonitorCE.exe
Config.txt
T-DMB_SDIO_V3_08_15.inp
DVB-T_SDIO_V3_08_15.inp
DVB-H_SDIO_V3_08_15.inp

[sekile]

I am trying to start DVB-H with your software and drivers but always says that receiver is not plugead in. Is it possible to have DVB-T and DVB-H at the same time installed on phone or I must choose

[dattad]

What ROM do you use? Do you run Cyberlink player or GSmart TV?

[sekile]

After several time of hard reseting my phone i don't know how but i manage to install drivers for DVB-H. In Cyberlink program when i put to scan for channels he found nothing, because he scan only 599MHz, but I need other frequencies. Where can i change it

Posted after 7 minutes 18 seconds:
I use t600 WM 6.1 LITE unofficial (English) version 3.50

Posted after 21 hour 20 minutes 16 seconds:
DVB-H still don't work, again message that driver is not installed . I reboot 100 times but nothing. I don't understand where is the problem